CMIT 265 

Name:_________________________________

Telnet to the Cisco router in our network at 192.168.100.198
It's old, only allows 5 logins at a time, 
so maybe someone/everyone has to double up with a partner.

Find out basic hardware, configuration and statistics
using the most frequently used 'show' commands:

Router hostname:______________
What model of router:________________________
What version of IOS:________________________
How much RAM:________________________
How much NVRAM:________________________
How much flash memory:________________________
Name and size of image file:________________________
How many Ethernet interfaces:________________________
 Their names:________________________
 Their IP addresses and mask:________________________
How many Serial interfaces:________________________
 Their names:________________________
 Their IP addresses and mask:________________________
Router uptime:__________________
What timezone:________________________

Ethernet interface
MAC address:________________________
Bandwidth (BW):_____________
MTU:_____________
load:____________
#runts:__________
#giants:_________
#babbles:________
#dribbles:_______

Your host's IP address:______________ (look on your host)
Ping time to it:_________________
Ping time to 192.168.100.1:________________________
Ping time to 192.168.4.1:________________________
Ping time to 218.40.186.129:________________________
Ping time to 192.168.13.5:________SKIP________________
Default gateway:________________________
#hops to www.yahoo.com: __SKIP______________________

What tty line is your telnet connection:___________
Looking on the router only:
  Your host's MAC:________________________
 SKIP: Your host's ephemeral source port of this telnet session::_________

Static routes, if any:________________________

#IP total packets Rcvd:________________________
#IP total packets Sent:____________________________
#IP Broadcast received and sent:___________________
#TCP total packets received:________________________
#TCP total packets sent:____________________________
#UDP total packets received:________________________
#UDP total packets sent:____________________________
#ARP received:________________________
#ARP sent:____________________________

#ICMP Rcvd echo:_______
#ICMP Sent echo reply:_______
From your host, ping the router.
#ICMP Rcvd echo:_______
#ICMP Sent echo reply:_______
The difference between the before and after the pings should be 4,
unless someone else was pinging too.